Satellite Dish Antenna Installation Service

We provide services for installation of C-Band and Ku-Band Satellite Dish antenna for free tv channels, portable satellite dish, free air channels, freetoair channels.

Old Software for Zenega cd1004i STB dish tv set top box.

73 Comments


This original factory reset possible. The manual supplied with the 1004iS gives a lot of possible combinations and tuning made possible of other networks other than Dish Zee’s authoritarion dragonic force forced upon us despite of the fact.

if you want to change your dish tv software then i hve old soft ware please download it and enjoy all fta channels without any problem.

Download loader software.

http://www.ziddu.com/download/9945415/ol…r.zip.html

and then download firmware software.
http://www.ziddu.com/download/9945414/ol…e.zip.html

if you want to see all free to air channels in india for dish tv LNB then download here it.

http://www.ziddu.com/download/9945413/Ns…..pdf.html

The Handan Broadinfocom of Korea say there Zenega 1004iS has a lot of facility of 4000 channels setting with Disq 1.0 1.2 facilities. Zenega untility password is 86427531.
Please let me know if any body need anything else.

About these ads

Author: Pradeep Tomar

Hello Friends, Now we have moved to new Site address at http://www.dthnews.com so for latest updates and news please visit DTH News . com

73 thoughts on “Old Software for Zenega cd1004i STB dish tv set top box.

  1. what the cable needed for this?is it safe?plese put cable number here as i dont have any cable.

  2. you can use for this RSS cable or usb to db9 cable.

  3. I was viewing FTA channels on my Dishtv right from the starting without paying any subscription. Now few days back my stb got upgraded automatically. Now it asks for sim card. I have no sim card. and unable to enjoy fta air channels. PLZ help.

  4. where is your viewing card, okay you can purchase new mobile sim card, please remember do put sim from card and put whole card to set top box and enjoy watching

  5. Hi I own a DISH TV STB and for the last 4 months I have not paid the subscription. Now I am not getting any channels (even free to air ones). Is there a way to get FTA channels alone? Pls help.

    • Hi,
      If you want to watch all free to Air channels in your Dish then you have two ways. First job is that you will have to buy a new DTH receiver and replace with dish tv STB and second job is you will have to do some settings in your STB so please tell me if you have some technical knowledge then I can tell you all things and if you don’t have any technical knowledge then please do not remove or change your setting because then you will have to call visit to customer care representative for watch your current channels so please let me know …what is better way for you….

      Thanks
      Arun

      • Hi arun,
        I have some technical knowledge and I want to know how to change my settings of my dishtv set top box to watch fta channel .Please replay me as soon as possible.

        samarendra

      • hi arun,
        I want to know techniq to alter the settings to get FTA free channels.
        plese reply me by email.
        Thanks.

    • Im jaheer dishtv user,hello frns you want to see FTA channels in dish tv without subscription .
      pls follow my instructions

      1.first open u r dish tv setup box upper dome

      2.you see a bus cable connect sim card board(is upperside)and processeor board check

      3.After you carefully to disconnect the bus wire b/w the two boards

      next fix you set up box switch on tv with connection ,tune the channels
      4.Download or inbuilt free channels are play and happy to see with out any charges

      from Zaheerahmed

  6. Dear Sir/Madam

    I was trying to download zenega loader from your link given below which is on your web page.

    http://www.ziddu.com/download/9945415/ol…r.zip.html

    But unfortunately this is not a zip file it is a PDF file which is same as 3rd link in your web page.
    It is therefore requested kindly send me the required loader by email or correct the link in your site.

    Thanking you

    Irfan N

    • there is Two download link one is information in PDF file and others and download links please check.. and let me know about that….

      Thank you,
      Arun

  7. is it possible to downgrade the software from Zenega CD2004Ic STB
    Present version is V 3.00
    I want to reduce it to V 1.65 or V 1.56
    Please help me in this regard
    thankyou in advance.

  8. sir. i have zenega cd2005-6 for dish tv . i want to see fta channel on it.viewig card has lost.there is no viewing card in it. is it possible to do like that. i have some knowledge in operating stb and how can i do it by using pc. tell me sir . thanks

  9. I was viewing FTA channels on my Dishtv right from the starting without paying any subscription. Now few days back my stb got upgraded automatically. Now it asks for me and unable to enjoy fta air channels. PLZ help my setup box zenega cd1005s lps.help me old softwer downlod link and instolation guide line

  10. This is Useless. What u R posted is data file not firmware. this is useless for software upgraded STB’s

  11. You have downgrade zenega softwware only by stb to stb .to do this first collect an old zenega reciever (CD10xx) with firmware ver 1.65 or V 1.56. then make a cross linked RS232 cable (NULL MODEM).to do this buy two 9 pin RS232 female connectors (Available in all majour electronics parts shops) and 3 pices of wire. solder pin 2 of first plug to pin 3 of second, pin 3 to pin 2 and pin 5 to pin 5.Done. now you have a RS232 Cable.then connect your stb to the old stb via RS 232 port.Turn on OLD (Master) stb only. press menu and try thease codes (with remote) 6006 or 9009 or 15935764 or 86427531 or 6834 or 6843 or 75395164 (Code may diffrent in verious versions).if you succeed you get a new menu. from this menu select program download and press OK. then turn on second reciever.now the process of software upgrading will start.

    You can use the same cable to connect stb to pc. but there are no firmwares alable in online now. the above mentioned file is not firmware. it is only database file.it will change your STB’s serial no and may cause damage.

    • dfdg :
      You have downgrade zenega softwware only by stb to stb .to do this first collect an old zenega reciever (CD10xx) with firmware ver 1.65 or V 1.56. then make a cross linked RS232 cable (NULL MODEM).to do this buy two 9 pin RS232 female connectors (Available in all majour electronics parts shops) and 3 pices of wire. solder pin 2 of first plug to pin 3 of second, pin 3 to pin 2 and pin 5 to pin 5.Done. now you have a RS232 Cable.then connect your stb to the old stb via RS 232 port.Turn on OLD (Master) stb only. press menu and try thease codes (with remote) 6006 or 9009 or 15935764 or 86427531 or 6834 or 6843 or 75395164 (Code may diffrent in verious versions).if you succeed you get a new menu. from this menu select program download and press OK. then turn on second reciever.now the process of software upgrading will start.
      You can use the same cable to connect stb to pc. but there are no firmwares alable in online now. the above mentioned file is not firmware. it is only database file.it will change your STB’s serial no and may cause damage.

  12. dfdg :You can downgrade zenega softwware only by stb to stb .to do this first collect an old zenega reciever (CD10xx) with firmware ver 1.65 or V 1.56. then make a cross linked RS232 cable (NULL MODEM).to do this buy two 9 pin RS232 female connectors (Available in all majour electronics parts shops) and 3 pices of wire. solder pin 2 of first plug to pin 3 of second, pin 3 to pin 2 and pin 5 to pin 5.Done. now you have a RS232 Cable.then connect your stb to the old stb via RS 232 port.Turn on OLD (Master) stb only. press menu and try thease codes (with remote) 6006 or 9009 or 15935764 or 86427531 or 6834 or 6843 or 75395164 (Code may diffrent in verious versions).if you succeed you get a new menu. from this menu select program download and press OK. then turn on second reciever.now the process of software upgrading will start.
    You can use the same cable to connect stb to pc. but there are no firmwares alable in online now. the above mentioned file is not firmware. it is only database file.it will change your STB’s serial no and may cause damage.

  13. Rafick Ahmed :i have tray to do this prosess,but no change ver 3.00.

    Pls explain the procedure you’hv tried.

    • frist one old zenega reciever (CD10xx)connected two 9 pin RS232 female connectors 3 pices of wire. solder pin 2 of first plug to pin 3 of second, pin 3 to pin 2 and pin 5 to pin 5.Done. now i have a RS232 Cable.then connect and 15935764 remote cord use to old stb than stb show download and power on to downloading stb and automaticaly software is upgrading start ,but when i see the upgrading stb only change to database
      no change firmware. pl advise how to change firware .

  14. where i can find my stb no in my dishtv

  15. sir this is krishan kumar i have a zenega cd1004s box i tried to download fta channel software by stb to stb but after the process complete the remot and button on reciever stop working.
    i tried to download software through the computer but the same result comes . i also load a boot file from windows file after that stb light become red and when restart the box there is no light while i check the power correctly . tel me the solution by which i can reload the software again
    thanks

  16. hello sir,
    i have a zenga set top box.i want to see fta channels with the same set top box.for which some setting should be changed or unlock the set top box.i have the technicals knowldge.can u help me for view the fta channel.

  17. Sir i have zenega dishtv reciever model 1004is i want to change its software sir plz tell how can it possible

  18. PLZ ANYONE PLEASE HELP ME….

    I have Zenega dishTv model 1004is.But It is not functioning right now. When Swithched on, The Light will start to blink continuously and no display on sceen.What is the problem for that… do you have same problem like this?. how to fix this?

  19. I have read this topic, con any body tell me how to prepare stb to pc cable? how to install software to see the fta thanks

    • buy two 9 pin RS232 female connectors (Available in all majour electronics parts shops) and 3 pices of wire. solder pin 2 of first plug to pin 3 of second, pin 3 to pin 2 and pin 5 to pin 5.Done. now you have a RS232 Cable.then connect your stb to the old stb via RS 232 port.Turn on OLD (Master) stb only.

  20. How i can get video con d2h model 1011 free to air channel this is new model any have old model software video dth?

  21. hi sir this is krishan kumar would u plz tell me from where i can download the boot change file for my zenega cd-1004s stb box

  22. please give me solution how to connect dish tv stb zenega 1004 is in pc? i have usb to serial (rs 232) cable ,and its driver. But i have not set top box driver or firmwire. And how to change a software of stb new to zee network. plese give me solution in detail. muna.sakhigopal
    mob- 09861041718
    plese help

  23. i Got by Set top box downgraded recently. I was getting all PAID channels but now i lost few channels like ZEE/SONY/COLORS/IMAGINE/SET/ESPN and 1-2 more.

    I downgraded my software from Old Lajpat Rai market. They took FLASH away from STB and programmed it with Old software version 1.55

    • Dear anurag
      have u asked the shopkeeper try to open ZEE/SONY/COLORS/IMAGINE/SET/ESPN and 1-2 more?ask him to change configuration….
      what he said?
      otherwise contact me at gblue2009 at gmail.com

  24. i have new model zanega 1004is box in this box there is no serial cable jack how i download set to set software in box

  25. I have Zenega CD1004iS box. Recently I pressed “Restore Factory Setting” button after that I did software upgrade and at the end I pressed Channel search button. Now I am getting 173 out of 193 channels. Few channels like Color, Cartoon network, HBO etc are missing. Please tell me how to get those missing channels. One more thing I want to tell that before it used to be 23/24 networks now I am getting only 22 networks.

    Pls help. Thanks & Regards – Om

  26. Can view Dish TV suscribed channel along with this FTA channels?

  27. how soft wear to anebel dish tv logo & box serial no pls teal me

  28. I want to view only fta channel in my set top box zenga CD-1004s.

  29. Valuable information. Lucky me I discovered your website accidentally, and I am surprised why this twist of fate didn’t came about in advance! I bookmarked it.

  30. Hallo sir, will some one tell me with which connector i can connect my zenega cd-1004iS with pc. Bcz there is no serial port in that

  31. ZENEGA 1004S NO SINGIAL

  32. I savor, cause I found just what I used to be having a look for. You have ended my 4 day long hunt! God Bless you man. Have a nice day. Bye

  33. Really an informative site,, keep it up

  34. can anyone help me to reset the parental control password which i had forgot for my dishtv zenega cd-1004is stb. I tried many time with dish they told that they had reset but nothing hapenned so far. I am in dubai and i cannot take stb to dishtv service centre. Please help as i am unable to view the channels which i locked and eventhough i am paying for it

  35. sir any solution of zanega 1004is+

  36. dear sir
    I have Zenega CD 1005S. I want to see only Fta channel. Because My vc is Blocked.

    Please help me sir. How can I unlock my vc ?
    My parental lock code also forgotten. I don’t know utility code also.

    Best regards.

    Mr.Shahin.

  37. I want to install old software on zenega reciever but there is no port.

  38. my name kd baloch me from pakistan i had a zenega cd-1004is reciver which does n,t have rs 232 on it s back .what should i do 2 watch fta channels

  39. my name kd baloch me from pakistan i had a zenega cd-1004is reciver which does n,t have rs 232 on it s back .what should i do 2 watch fta channel how it s possible.

    • open cover their is 3 pin port in side on main board,,,,,,,,, 1 is Ground connect to pin 5 ,,, 2 connect to 3 and pin 3 connect to 2 and download from other stb or from pc

  40. How to watch fta channels on dish tv , i hv zenega C-D 1004S reciever

  41. Sir,
    I have a Dish Tv receiver Zenega CD1004S and im unable to watch the Tv channels as my subscription is expired. But i want to watch FTA channels. Is there any option to watch FTA for free, If so what is the procedure? Thanks in advance.

  42. Please give me your number on my email

  43. dear sir
    I have Zenega CD 1004is.

    Please help me sir. How can I unlock cod free chanel…without sim card

    Best regards.

  44. Pls give me a trick to get fta channels in my dishtv

  45. DEAR SIR I AM USE IN DISHTV ZENGA 1004I USE BUR MY VIEWING CARD IS LOST SIR I REQUEST PLZ HELP KO E ASI TRICK BATA YE KI MERA BOX SIM MANGTA H VO NA MANGE PLZ HELP ME SUNIL….

  46. Sir, I have A Zenega CD-1004is Dish TV Receiver. I need to Downgrade this firmware.It have no rs-232 jack. I opened the receiver. i found 9 pin points blank in board. i think it is the rs-232. i have swloader. but no firmware, i need a firmware.Help ME

  47. Dear Sir.
    what is the default parental lock code for zenega cd-1005s stb ? i can’t unlock my stb parental page.
    please send me sir.
    thanks.

  48. Sir how to connect the stb to PC

    Mean by which type of cable , to updatr the software
    Plz mail me

  49. I have receiver Zenega cd1004is with Zee DTH dish TV connection my remote damage but I have same other remote Zenega cd1004is it’s possible to program my receiver? please Help

  50. Hi are using WordPress for your blog platform?
    I’m new to the blog world but I’m trying to get started and create my own.
    Do you need any coding knowledge to make your own blog?
    Any help would be really appreciated!

  51. zee softwarefree download for zenega stb

  52. Zenega 1004is displays loading please wait. No panel button works, no remote works. Siglal ok.

  53. I Have Zanega stb cd 1004is,,,,,, i was tried to download old softwere from my pc unfortunatly i load boot bin file after compleeting it cant restart,,,,,,,,,,,,,,No light,,,,,,,,,,,,,,,,Power suply is ok working in other stb………….. there is any way for recovery please HELP HELP HELP

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 183 other followers